CPC Rulez
https://cpcrulez.fr/forum/

HxC Floppy Emulator
https://cpcrulez.fr/forum/viewtopic.php?f=5&t=100		 Page 49 sur 49
Auteur :  Jeff_HxC2001 [ 26 Fév 2021, 08:27 ]
Sujet du message :  Re: HxC Floppy Emulator
New Firmware version for the SD HxC Floppy Emulator (Rev B/C/F/MAX) :

Image

SDCard_HxCFloppyEmulator_firmware.zip

sd_hxc_floppy_emulator_firmware_release_notes.txt

Code :
25 February 2021: Firmware SD HxCFloppyEmulator v1.8.7.1 (beta)

     - "Config-Less" support : The HXCSDFE.CFG file is now optional.

       You can now use the emulator without this file on the SDCard.

       Note 1: Without this file the emulator is in "normal mode" / direct
               browsing mode.

       Note 2: Without this file the last selected file position is not saved.

       Reminder : You can setup the emulator with the embedded menu without
                  the need of any configuration file :
                  To access this menu, remove the SDCard and press the select
                  button. Once in the menu you can choose the option you want
                  to change.

     - System and hidden files and folders on the SDCard are now invisible on
       the emulator. You shouldn't be annoyed anymore by non-HxC folders and
       files on the emulator. :)

     - Image auto-load disabled when the user press the left or right button :
       -> Faster SDCard browsing, More consistent browsing behavior.
       (On this point if you prefer the old/previous behavior, don't hesitate
        to contact me to let me know : hxc2001 at hxc2001.com)
Auteur :  Princesse Mariana [ 29 Juin 2021, 15:55 ]
Sujet du message :  Re: HxC Floppy Emulator
Citer :
28 June 2021 : Firmware STM32 USB HxCFloppyEmulator v3.7.4.1a
- Some important fixes in the emulation from folder mode (Informations about this mode are available on this page : https://hxc2001.com/docs/gotek-floppy-e ... older.html)
- The emulation from folder mode was broken on ARTERY MCU based Goteks.
Update recommended for all "emulation from folder mode" users !

url: https://hxc2001.com/download/floppy_drive_emulator/
Auteur :  Princesse Mariana [ 02 Déc 2021, 08:50 ]
Sujet du message :  Re: HxC Floppy Emulator
Citer :
10 October 2021 -> 1 December 2021 : Firmware STM32/AT32 USB HxCFloppyEmulator v4.2.X.Xa - Pre Release

(Cumulative release notes - Work In Progress ! Latest version : v4.2.0.1a)
(>>> Please find these WIP firmwares in the "WIP_Firmware" folder ! <<<)

- AT32 SFR1M44-DU26, SFR720-DU26 (SFRC2D.B Gotek PCB) support added !
- SFRKC30.AT2 PCB Gotek (QFN32 AT32 MCU) support added !
- Init layer enhanced to support all Gotek variants in a better way.
- Low level layer enhanced to support all Gotek variants in a better way.
- More STM32 and AT32 MCU models supported !
- Amiga and Atari ST File selector updated to support the new v4.x.x.x firmwares series.
- Sound fixed on Artery Goteks.

- New "SWAPMEM.BIN" swap file system implemented to deal with the low RAM memory
ARTERY Goteks : Better HFE format and long write operations support (Amiga, E-mu Emulator, Arburg...)
- Bug Fixes !

19 September 2021 : Firmware STM32/AT32 USB HxCFloppyEmulator v3.8.3.1a

- Raw *.IMG PC Files : Fix the 40 tracks double sided images support.
- Build-in USB stick init / format function (custom firmware) :
If the the 7 segments screen embedded menu is disabled, the format mode can be enabled by the user by just pressing both buttons with no USB stick connected.
- The eject/insert feature can now be disabled on the custom firmware
page.

29 August 2021 : Firmware STM32/AT32 USB HxCFloppyEmulator v3.8.1.2a

- Build-in USB stick init / format function :
* The USB stick can now be formatted/initialized for the "Image-less mode" by the firmware.

Remove the USB stick, press both buttons to enter the embedded menu and select the sub menu to activate the format mode :
- 7 digits display "d" menu entry -> Should display "For"
- OLED display "Format USB Key" menu entry.

Then insert the USB stick you want to format.

WARNING : Formatting will erase all data on the USB stick !

The default built-in image is an HD 1.44MB Floppy disk, but you can select another built-in image on the firmware customization service page if needed : https://hxc2001.com/custom_fw/

15 August 2021 : Firmware STM32 USB HxCFloppyEmulator v3.7.5.1a

- SFRKC30 / SFR1M44-U100LQD Gotek support enhanced :
* The new rotary port is now supported.
* New explicit U100LQD OLED configuration. (Specific binaries for this new Gotek are now provided in the "New_U100LQD_Gotek" folder)

- The detected hardware model can now be read in the embedded menu (Sub menu 'F' for the 7 digits Gotek and in the "FW/HW version" sub menu for the OLED Goteks).
Hardware ID definitions :
* 000 : Original STM32F105 Gotek (64KB of RAM)
* 001 : 64 pins ARTERY AT32F415RCT7 on an old STM32 Gotek board (32KB of RAM)
* 002 : 48 pins ARTERY AT32F415CBT7 (New board) (32KB of RAM)
* 003 : 64 pins ARTERY AT32F415RCT7 (New SFRKC30 / SFR1M44-U100LQD Gotek : Native OLED and Rotary support) (32KB of RAM)
- Test firmware updated to support all STM32 and Artery Goteks.

src/url: https://hxc2001.com/
Auteur :  Princesse Mariana [ 03 Jan 2022, 10:27 ]
Sujet du message :  Re: HxC Floppy Emulator
Citer :
10 October 2021 -> 3 January 2022 : Firmware STM32/AT32 USB HxCFloppyEmulator v4.2.X.Xa - Pre Release

(Cumulative release notes - Work In Progress ! Latest version : v4.2.1.1a)
(>>> Please find these WIP firmwares in the "WIP_Firmware" folder ! <<<)

- AT32 SFR1M44-DU26, SFR720-DU26 (SFRC2D.B Gotek PCB) support added !
- SFRKC30.AT2 PCB Gotek (QFN32 AT32 MCU) support added !
- SFRKC30AT3 PCB Gotek (TQFP48 AT32 MCU + New rotary port) support added !
- Init layer enhanced to support all Gotek variants in a better way.
- Low level layer enhanced to support all Gotek variants in a better way.
- More STM32 and AT32 MCU models supported !
- Amiga and Atari ST File selector updated to support the new v4.x.x.x firmwares series.
- Sound fixed on Artery Goteks.
- New "SWAPMEM.BIN" swap file system implemented to deal with the low RAM memory ARTERY Goteks : Better HFE format and long write operations support (Amiga, E-mu Emulator, Arburg...)
- Bug Fixes !
Page 49 sur 49 Le fuseau horaire est UTC+1 heure
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/