03 December 2017: Firmware STM32 USB HxCFloppyEmulator v3.1.0.4a
Major update !
- New direct file formats support (Read & Write !) : - Acorn machines : *.ADL,*.ADM,*.SSD,*.DSD and *.ADF file support - Camputer Lynx : *.LDF - Commodore C64 : *.D81 - Thomson machines : *.FD - Sam Coupé : *.SAD, *.MGT - MSX Machines : *.IMG, *.DSK - Spectrum : *.TRD, *.SDD
- New menu entry : Target system family selection. This reduce a lot the risk of erroneous raw file identification.
- Lots of RAW file support improvements : All sector sizes supported, advanced track skew and interleaving support. FM & MFM support.
- Amstrad CPC DSK support : Fix for the One Disk/double sided Batman demo.
- Fix attempt of the "diymore.cc" OLED screens : OLED init screen delay menu option added. (Note : Please avoid these "diymore.cc" screens until i got an idea what is the root cause of the issue.)
USB STM32 HxCFloppyEmulator firmware upgrade v3.0.8.2a + Alpha 3.1.1.1a (HFE + HFEv3 + ADF + ST + IMG + (E)DSK file format support)
21 January 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.1.2a - "Load Last selected image" : Save & Restore previous folder position.
15 January 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.1.1a - Fix broken Rotary support in normal mode. (Connection points reminder : Clock -> J7 pin 2,Direction -> J7 pin 1)
17 December 2017: Firmware STM32 USB HxCFloppyEmulator v3.1.1.0a - More direct raw formats support : - Akai formats (*.IMG) - Casio FZ1 (*.FZ1) - Emax machines formats (*.IMG) - Ensoniq EPS & Mirage series formats (*.IMG) - General Music formats (*.IMG) - Korg formats (*.IMG) - X68000 (*.HDM,*.XDF) - Internal optimizations.
HxCFloppyEmulator software v2.1.8.0
21 January 2018: HxCFloppyEmulator 2.1.8.0 : - New Loader : Atari ATR file image loader. - New Write & Loader : HFE V3 : variable bitrate and other proctections support. (Experimental ! The file format definition is not yet finished !) - Kryoflux raw files Writer : Fix dead lock with tracks without pulse. - Amiga DOS image browser : 85 tracks AmigaDos image support. - Disk Image browser (FAT & AmigaDOS) : Fix null-sized file import issue. - Disk Image browser (FAT & AmigaDOS) : Can now delete folders. - All image loaders : Fix possible track skew calculation error. - Emax image loader : GAP fixed to 30. - Thomson *.FD loader : Sector interleave set to 7 - Command line tool : -uselayout option can be now used to specify external xml disk layout file.
- New 7 segments config menu 0 (System family) entry :
11 = Ensoniq ASR10 (Ensoniq Auto DD & HD support)
- Some file system & disks access sanity checks added.
13 February 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.9.1a
- New menu setting interface menu for normal 7-segments Goteks:
-> To access it, remove the USB Stick and press both buttons. -> Choose the sub menu number - wait some seconds for the selection validation. -> Check and/or change the setting - wait some seconds for the selection validation.
The new setting is then saved into the device. Reminder : To clear all settings to the default values, press the right button at power up.
Current Menu and sub selection definition :
Menu 0 - System family selection : 00 = AUTO (DEFAULT) 01 = Amiga 02 = Acorn 03 = Atari ST 04 = IBM PC AT/XT 05 = Camputer Lynx 06 = Commodore 1581 07 = Thomson 08 = x68000 09 = SAMCOUPE 0A = MSX 0B = Spectrum 0C = Akai 0D = Casio 0E = Emax 0F = Ensoniq 10 = General Music 11 = Korg
Menu 1 - Interface mode : 00 = AUTO (DEFAULT) 01 = IBM PC DD 02 = IBM PC HD 03 = ATARI ST DD 04 = ATARI ST HD 05 = AMIGA DD 06 = AMIGA HD 07 = CPC DD 08 = GENERIC SHUGART DD 09 = IBMPC ED 0A = MSX2 DD 0B = C64 DD 0C = EMU SHUGART 0D = S950 DD 0E = S950 HD
Menu 2 - Write protect mode : 00 = AUTO (DEFAULT) 01 = Write protected. 02 = Write enabled.
Menu 3 - Double Step : 00 = AUTO (DEFAULT) 01 = Single step 02 = Double step
Menus 4<->E : Not currently assigned. Menu F - Display firmware version
06 February 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.8.1a - Raw files : Write sector performance increased. Near Real time sectors write !
05 February 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.6.0a - Low level Floppy IO optimizations.
04 February 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.5.1a - Raw *.IMG PC Files : Use the DOS 6.22 disk layouts. - And as always some code optimizations.
02 February 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.5.0a - Cache flush fix : Do you not reorder the cache when not needed ( e.g when the track fit the cache size ) - CFG File V1 fix (Autoboot mode) : slots support now file images with 2 characters filename extension... - More code Speed optimizations. (again ! )
01 February 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.4.0a - More Code Speed optimizations. - RAW MFM & FM Images (IMG/ST/...) : - More Write speed improvement : Sector Data cache prefetch.
31 January 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.3.0a - RAW MFM & FM Images (IMG/ST/...) : - Write speed improvement : - Track cache workflow improvement. - Code optimization (CRC16, MFM 2 BIN...).
29 January 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.2.0a - *.ST 720KB Files : Switch to the TOS 1.62 Disk Layout. - RAW files loader : Internal enhancement.
27 January 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.1.4a - Config file "Load last loaded floppy" flag is now supported in indexed and file selector mode.
27 January 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.1.3a - Normal mode Fix : ST files are visible again !
15 March 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.18.1a
- Normal mode : Remove unwanted key delay when entering in direct mode.
17 March 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.20.1a
- USB Direct Access mode code refactored : - Read/write performance increased (hxcmount). - Command/Write indications printed on the LCD.
- USB access cache : Write timeout value set to 2 seconds.
18 March 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.21.1a
- Indexed mode : Ignore file extension. You can now use any file extension as long as the file is supported by the floppy emulation engine. (Can be DSKA0000.HFE/IMG/DSK/ADF/ADL...)
- Acorn machines (*.ADL, *.ADM, *.ADF): Sectors gap, interleave and tracks skew aligned to the real machine.
19 March 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.21.2a
- USB Direct Access mode code : Index gap increased (Amiga File selector & HxC copy utility under WB fix)
1 April 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.22.1a
- TI99/4A : Direct support of *.DSK/*.PC99/*.V9T9 sectors dump images SD/DD/HD density support (Read & Write).
- New embedded menu entry : You can now force the user interface mode (Normal/Indexed or selector mode selection).
28 April 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.22.6a
- HFE files : Fix MPC60 MkII formatted images write support regression. May also fix possible write issues on HFE files with some others machines/disk formats. Update recommended.
27 May 2018: HxCFloppyEmulator 2.1.11.1 - Hard-sectored H8D Heathkit raw file Loader & Writer added !
24 May 2018: HxCFloppyEmulator 2.1.10.1 - Kryoflux Stream Loader (*XX.X.raw) & Stream analyzer : Hard-sectored images support and various fixes ! - Kryoflux Stream Loader (*XX.X.raw) : bmpexport.txt config file to generate the full stream track graph. - NSI Northstar raw file Loader & Writer added !
12 May 2018: HxCFloppyEmulator 2.1.9.3 - Kryoflux Stream Loader (*XX.X.raw) : Another fix for the index position ! - Kryoflux Stream Loader (*XX.X.raw) : filter.txt config file to adjust the internal bitrate filter. - Flux Stream Analyzer : Internal filter can now be set. - ADF Writer : Amiga ADF HD file (22 Sectors/track) support added.
11 April 2018: HxCFloppyEmulator 2.1.9.2 - Kryoflux Stream Loader (*XX.X.raw) : Loader & writer index position fixed.
Citer :
2 May 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.23.1a - 7 segments Gotek : New menu entry : 5 -> Auto select delay setting. - Floppy Interface initialized before the screen. (Fix Emu Emulator second drive detection issue). - Amiga ID support enabled by default (HD ADF support).
27 May 2018: HxCFloppyEmulator 2.1.11.1 - Hard-sectored H8D Heathkit raw file Loader & Writer added !
Citer :
31 July 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.28.1a ( -> In the "Next_WIP_Alpha_Firmware_And_Tools" Folder !) - Files Browser : All Files/Folders with the hidden attribut set are not shown anymore... (Hide Windows/MAC system folders)
30 July 2018: Firmware STM32 USB HxCFloppyEmulator v3.1.27.1a ( -> In the "Next_WIP_Alpha_Firmware_And_Tools" Folder !) - Push buttons Auto-repeat : Better/Smoother rate changes. Rate changes delays adjusted.
Utilisateur(s) parcourant ce forum : Aucun utilisateur inscrit et 4 invité(s)
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets dans ce forum Vous ne pouvez pas éditer vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas insérer de pièces jointes dans ce forum